Two genoas, two mainsails and mizzen sail, self-furling forestay, main and mizzen winches, sail covers for main and mizzen, all sheets, halyards, rigging, ropes, blocks and rigging spares.

Sabre 120 Engine


6 cylinders

Displacement - 6.22 litres

Maximum Output - 120bhp

Rated Speed - 2,500rpm

Idle Speed - 750rpm

Max No-Load Speed - 2,900rpm


Cooling System - Closed fresh water system which cools the cylinder block, cylinder head and exhaust manifold.  Sea water is used to cool the fresh water through a heat exchanger.  The sea water system also cools engine and gearbox oil.


Fuel System - Two diesel fuel tanks, each 100 gallons, located at port and starboard sides of engine room.  Tank fillers located om deck above each tank.  Tanks are normally linked by large balancing pipe which can be closed at each end.  Screw valve gate valves from each tank lead to stopcocks which in turn lead to the primary fuel filter with two switchable filters.  A single pipe then leads to the engine fuel pump.  The fuel return leads to the port tank.


Air Supply - Air is supplied by ducting from dorade vents at each side of the aft end of the deckhouse roof to the engine room.  The engine draws air from the engine room atmosphere.


Print Print | Sitemap Recommend this page Recommend this page
© 2018 WAW Services
Additional photos by Argyll Cruising, Alison Mary Ashton and others - All rights reserved